Access Points

airPoint™ Indoor

airPoint™ is a long range, easy to install Wireless Access point for Home and small office requirements. airPoint™ provides wireless freedom and flexibility to work anywhere in the office or at home. airPoint™ is based on the IEEE 802.11b industry standard prescribed for Wireless LANs.

airPoint™ features LongRange™ wireless design that provides 100 mW radio power to cover long operating range. smartBridges' superior design of the radio receiver enhances the sensitivity to incredible -95 dBm level.

To increase the data range and ensure wireless network connectivity, airPoint™ adopts Dynamic Rate Scaling, thus always seeking to connect at 11 Mbps then automatically scaling to 5.5 Mbps, as well as 2 Mbps and 1 Mbps .When the signal strength increases, its speed also increases until it reaches the optimal rate, ensuring the highest level of service and the best continuity for data transmission.

airPoint™ is powered through the Ethernet cable by using the standard accessory powerShot included. Using this method makes it convenient to locate the aitPoint up to 100 meters away from the availabel power source.

airPoint™ is equipped with a choice of security levels to protect the data. It supports standard Wi-Fi prescribed Wired Equivalent Privacy (WEP) security using 40/64 bit Key. Additionally airPoint™ also offers enhanced 128-bit key encryption for superior data protection. Another key security features built into airPoint™ includes MAC level security that restricts the permitted access to pre-registered wireless clients base on their MAC ID.

airPoint™ can be configured by simpleMonitor™ specifically designed to simplify wireless network management complexities. User can configure wireless network parameters such as, Channel selection, Network association, data rate, and site survey by using simpleMonitorô. It's graphical user interface is extremely intuitive for navigating, examining, and configuring the airPoint.


  • Radio Power Output of 100 mW provides extended operating range.
  • High receiver sensitivity of up to - 95dBm provides error-free signal reception
  • Provides continuous connectivity at the highest rate even in high interference environments by automatically selecting the highest usable rate
  • External detachable antenna with SMA connector
  • Complete 14 Channels support for worldwide coverage
  • High Level security with full 128 bit Key WEP encryption.
  • MAC Address Authorization for robust access control to the Wireless Network.
  • Auto Roaming in compliance with IEEE 802.11b  
  • Flash Memory storage of firmware for field upgrade


Supported Standards IEEE 802.11b, IEEE 802.3 & IEEE 802.1d
Interface Ports Ethernet RJ45 (10/100Mbps)
Data rate 11Mbps with auto fallback
Frequency Band 2400 - 2483.4 MHz
Wireless Medium Direct Spread Spectrum (DSSS)
Operating Channels 11 Channels (US, Canada & Japan), 13 Channels (ETSI)
Output Power 100mW (Max)
Range Up to 1600 meters (5200 feet) in Open Air 
Antenna External detachable antenna with SMA connector
Receiver Sensitivity - 94 dBm at 1 Mbps
Encryption WEP up to 128 bits key
Management SNMP (MIB, Tarps), TFTP for firmware upgrade
Roaming Compliant with IEEE 802.11b requirements
LED Indicators Power/RF Activity/Network Activity
Power Source

Power Adapter 100~230 V AC 50/60 Hz, Power Over Ethernet (PoE) Injector supplied as a standard accessory

Operating temperature 0 deg C (+32 F) to +50 deg C (+122 F)
Relative Humidity 10 to 90% non-condensing
Dimension (W x D x H) 120mm x 42mm x 130mm
(4.72 inches x 1.65 inches x 5.11 inches)
Unit Weight 0.20 kg (0.44 lbs)
Shipping Weight 0.70 kg (1.54 lbs) 
Download Datasheet    |    Go Back
Best view 1024x768 resolutions Internet Explorer 5.0+  © 2003 Air Connect Engineering. All rights reserved.